Kodak RP 30 Manual de usuario

RP 30LASER PRINTEROPERATOR'S GUIDE

Regulatory and Safety Information Laser Source Label F Locations of Laser Safety Labels B C (side) A F E D KODAK PROFESSIONAL RP 30 Laser Pri

Settings Sharpness of Edges This parameter is used for the correction of light/dark transition along edges, such as a window in a building. • Sh

Operator’s Guide Sharpness of Grain This parameter has a similar effect as Sharpness of edges, however on smaller structures (< 1 mm), such as o

Settings Digital Order Settings 1. Touch: • Settings • Machine settings • Network orders 2. Enter the required information. Remote Order File

Operator’s Guide Remote Order Autosave Defines an external storage location within the network, where to the RP 30 Laser Printer copies and saves th

Settings PDM (D-Bridge) Information about the PC (PDM Server) on which the PDM Software is installed (required for network orders): • Address or

Operator’s Guide Other Settings 1. Touch: • Settings • Machine settings • Other settings 2. Enter the following information required for the pr

Settings • Check PpF If this parameter is activated a warning message will be displayed as soon as the number of prints (PpF) entered for an orde

Operator’s Guide Print Configurations 1. Touch: • Settings • Print configurations 2. Enter the required information. 4-40 KODAK PROFESSIONA

Settings All the settings required for creating the desired print size (for example, 9 x 13) including further options (such as backprint) are sto

Operator’s Guide Creating, Editing, and Deleting Configurations The various configuration lists contain all related sub-configurations. Creating a N

Operator’s Guide Safety Precautions Legal Notice The RP 30 Laser Printer is designed for operation in conformance with all local safety regulations.

Settings Editing a Configuration 1. Touch the configuration. 2. Touch Edit and modify the settings in the next screen. 3. Save. Deleting a Config

Operator’s Guide Paper Configurations A paper configuration consists of a paper setting for each (width) and a surface. The cut length of the paper

Settings 2. Select from the Paper Settings and the Paper Surfaces. The paper settings and surfaces created before in the Machine settings are no

Operator’s Guide Backprint Configurations Settings apply to the print mode File print. For Network orders, the backprint is part of the image indivi

Settings Here the meaning of the term "Film mask" is "image source." For the RP 30 Laser Printer, the image source File prin

Operator’s Guide Here is some additional information about some of the parameters. Print date/time is printed for the formats selected under Machine

Settings Correction Configurations The options the RP 30 Laser Printer offers to improve the image can be combined in special configurations, name

Operator’s Guide For explanations of the function of these corrections, see Production Balance – Digital on Page 4-30. These corrections appear in

Settings Autosave Configurations Autosave configurations are used to save image files on a data carrier. The aspect ratio is kept. A folder is set

Operator’s Guide Autosave fixed • File format In this mode, the files are always saved in the format bmp. • Drive Selection of a local drive: flo

Regulatory and Safety Information Handling of Processing Chemicals Disposal of Chemicals and Containers Effluent Management IMPORTANT: IMPORTANT: R

Settings Autosave quality • File format bmp or jpg with various compression factors. • Drive Selection of a local drive (floppy) or external dr

Operator’s Guide PDM (D-Bridge) • Resolution and File format as in Autosave quality. The address of the PC where the PDM server (D-Bridge) is inst

Settings Front Print Configurations Front print configurations let you expose free text on the front of the print. 1. Touch: • Settings • Print

Operator’s Guide 4. Select the color and press OK or Select the color and press New. Modify the red, green, blue color parts in the next screen to

Settings Order Configurations As the sub-configurations are accessed in the order configurations, they must always be created first. A created su

Operator’s Guide 3. Select the Configuration type. • Single A single order configuration. See Creating a Single Configuration on the next page. •

Settings Creating a Single Configuration 1. Set the Configuration type to Single. 2. Select Film mask: File print. 3. Select sub-configurations

Operator’s Guide Creating a Package Configuration You can use any combination of order configurations. If a configuration with more than two paper w

Settings Reproduction Order configuration for image files that are to be printed without automatic image improvement. Printing is without preview.

Operator’s Guide Configuration Types in the Order Configuration List The configuration types are identified in the list by letters: S Single P Pack

Operator’s Guide Safety Precautions for the Handling of Chemicals WARNING: IMPORTANT: Be certain to follow these guidelines for the safe handling of c

Settings Defining a Configuration as the Standard Configuration One of the previously created Single and Package order configurations can be defin

Operator’s Guide Saving and Loading Settings and Configurations When to Save Settings • After the first machine startup and the creation of custome

Settings Load Settings 1. Touch: • Settings • Load settings 2. Mark the desired information by checking the box. 3. Select a medium, if neces

Chapter 5 Tests Contents Introduction... 5-

Operator’s Guide 5-2 KODAK PROFESSIONAL RP 30 Laser Printer

Tests Introduction Before the start of production, the printer and paper processor must be carefully calibrated to produce only the highest quality

Operator’s Guide Prerequisites for MBL and PBL Calibration Before printing the MBL and PBL calibration: 1. Check that there are no print orders pendi

Tests You can use the Settings menu (see Chapter 4) to set up how often the automatic PBL should be repeated if the values continue to be out of tol

Operator’s Guide Printing an MBL Test When it is necessary to print an MBL test, follow these instructions. Touch: • Test • Start MBL An Info scree

Tests Procedure for the First Machine Operation or After New Software Installation 1. Use the predefined paper configurations or set up configurati

Regulatory and Safety Information Warranty Information The following warranty information pertains to equipment that is installed in the United Stat

Operator’s Guide Daily Calibration With the MBL The MBL should be printed directly after system start (as soon as the chemicals have reached their nom

Tests Calibration of New Paper, Emulsion Changes, or Correction of a Paper Channel (Not Master Paper) 1. Print an MBL. This provides for a calibrat

Operator’s Guide Testing the Paper Processor To maintain or restore optimum processing quality, the chemicals of the paper processor should be checked

Tests 4. Touch: • Test • Control strip • Chemical control strip You receive a prompt to insert the chemical control strip. 5. Place the control

Operator’s Guide 5-12 KODAK PROFESSIONAL RP 30 Laser Printer

Chapter 6 Production Contents Preparing the Equipment for Different Orders ...6-3 Preparing the Pape

Operator’s Guide Network Orders ... 6-25 Operator-C

Production Preparing the Equipment for Different Orders Preparing the Paper Magazine Paper widths in the paper magazines are 216 to 305 mm (3.25 to

Operator’s Guide 4. Loosen the guide screws on the magazine exit. 5. Move the guides to the correct width. 6. Adjust the guides in the other sec

Production Putting Paper in the Magazine Photographic paper must always be stored in a cool and dry place. The best storage temperature is 2 - 10°C

Operator’s Guide Limitations Warranty service is limited to areas within Kodak’s established marketing centers in the contiguous United States, the is

Operator’s Guide Coding the Paper Magazine Set the paper magazine coding to the desired paper width and surface as indicated on the sticker. The cod

Production Paper Widths Not Yet Coded NOTE: If there is no free magazine code available for a paper width not yet coded, use the code of an unused

Operator’s Guide Changing the Paper Magazine IMPORTANT: IMPORTANT: To let the paper to rewind into the magazine, always wait 30 seconds after the la

Production Order Processing Order Number (Automatic / Manual) Order numbers are allocated either automatically or manually. See Machine Settings /

Operator’s Guide End of Order (Automatic / Manual) The orders are completed by end of order. The sorter moves so that the prints are separated in the

Production Print Modes With the RP 30 Laser Printer, you will use one of two print modes. • File Print: image files (jpg, bmp, tif) are loaded fr

Operator’s Guide Printing File Print Prerequisites • The RP 30 Laser Printer only accepts jpg, bmp and uncompressed tif file formats. Save any files

Production dTFS The dTFS function is used to compensate for the different characteristics of digital cameras (for example, to correct color casts an

Operator’s Guide Selecting the Configuration Type for an Order Three types of order configurations are available for file prints. They are represente

Production Reproduction To print a reproduction, select an order configuration of the reproduction type. In the list of order configurations this ty

Chapter 1 Introduction Contents Using the Documentation...1-3 Structure ..

Operator’s Guide Changing the Configuration and the Order Number Displaying the Current Configuration Touch Show configuration. • All details about

Production • If Change configuration is opened after Stop (button in the print modes with preview) or in the enlarged view of an image, the modific

Operator’s Guide Loading Image Files from Data Carriers Image files loaded from data carriers are combined in an order. The image files can be loade

Production Saving Digital Orders 1. Touch Save order. 2. Enter the name in the next screen and Save. NOTE: Orders that you print immediately and d

Operator’s Guide Printing File Prints without Preview With preview deactivated, the image files are printed without any other operator intervention b

Production Printing File Prints with Preview With preview active, a large number of functions are offered for image correction and image enhancement

Operator’s Guide • Autoprint (after Stop) The current image is printed and disappears from the display. The preview continues. • Skip The current i

Production Image Improvement After touching Improvement, modify the following parameters: • Sharpness – edges • Saturation • Sharpness – grain •

Operator’s Guide Saving Processed Images as Files 1. Touch Save. The button appears in the Image editing and Special screens. 2. Select File format,

Production Network Orders RP 30 Laser Printer can be connected with several workstations in the lab by way of a PDM server. These workstations can s

Operator’s Guide 1-2 KODAK PROFESSIONAL RP 30 Laser Printer

Operator’s Guide Automatic Start With this setting, and after the preset time without operator action has expired, a query window appears asking whet

Chapter 7 Correcting System Conditions Contents System Errors ...

Operator’s Guide 7-2 KODAK PROFESSIONAL RP 30 Laser Printer

Correcting System Conditions System Errors Avoiding Handling Errors CAUTION: 1. 2. 3. When shutting down the RP 30 Laser Printer, always use the E

Operator’s Guide Reset with the ON Button or Stop Button on the Screen There are two methods for resetting the system: • Pressing the ON button on t

Correcting System Conditions Error Handling General 1. Remove errors if the cause is known. 2. Touch Clear if this button is shown. 3. If requir

Operator’s Guide Image Processing Errors It is possible to have several images that cannot be printed. However, only the last image is shown. Touch Cl

Correcting System Conditions Printer Errors For messages such as: • Paper in the Printer • nn_LSxx not reached • nn_LSxx not free • TU2 not re

Operator’s Guide Removing Paper Jams WARNING: To avoid injury, be careful when working around the toothed belts, sharp corners, and sharp edges in t

Correcting System Conditions Special Case: When a paper jam occurs during a system shutdown or reset, the paper jam is only reported when the syst

Introduction Using the Documentation Structure This Operator’s Guide contains information about: • Safety precautions • Machine settings • Print

Operator’s Guide Paper Jam in the Transport Unit CAUTION: If a paper jam occurs, always withdraw the print engine first before pulling out the transp

Correcting System Conditions Paper Transport at the Bottom With the print engine pulled out: 1. Actuate the two levers (1) and open the locking m

Operator’s Guide 5. Remove the jammed paper from the paper transport. Paper Transport at the Top With the print engine pulled out, the locking mech

Correcting System Conditions Sheet Bridge to Transport Unit With the print engine pulled out, the locking mechanism opened, and transport unit pu

Operator’s Guide Transfer/Takeover Sections between Transport Unit and Print Engine Always pull out the print engine first: 1. Open the left-hand sid

Correcting System Conditions For paper jammed in the transport unit: 1. Leave the transport unit in the printer. Do not pull it out. 2. Remove t

Operator’s Guide Paper Jam in the Print Engine 1. Pull out the print engine. a. Open the left-hand side door. b. Open the locking mechanism using t

Correcting System Conditions 2. Turn the transport belt pulley of the stepper motor for the print drum. 3. Unlock (2) the bottom belt assembly

Operator’s Guide Paper Jam between the Transport Unit and the Lane Distributor 1. Open the right-hand printer door. 2. Open the locking mechanism (f

Correcting System Conditions Paper Jam in the Lane Distributor 1. Open the right-hand printer door. 2. Open the locking (fastening screw) and pu

Operator’s Guide Safety Precautions See the Regulatory and Safety Information in the front of this guide for details about: • Electrical precautions

Operator’s Guide Paper Jam between the Lane Distributor and Sheet Transfer 1. Remove the red fastening screw (1). 2. Remove the cover (2). 3. Hold

Correcting System Conditions Paper Jam in the Paper Processor WARNING: Risk of injury is possible if the wet section cover is unlocked unintentio

Operator’s Guide CAUTION: Chemical splashes may stain the covers. Use the splash guard (1) or remove splashes immediately with water. 3. Remove the

Chapter 8 Maintenance Contents Maintenance Schedule and Maintenance Intervals ...8-3 Daily Maintenance ...

Operator’s Guide Maintenance When Required... 8-37 Consumables...

Maintenance Maintenance Schedule and Maintenance Intervals Daily Weekly Monthly When required Maintenance jobs to be performed by the customer

Operator’s Guide Daily Maintenance Performing a Process Control for the Paper Processor Before performing process control, make sure: • The nominal

Maintenance 3. Close the printer door and touch: • Continue (to transport the control strip into the paper processor), or • Cancel (to terminate

Operator’s Guide Weekly Maintenance Removing Paper Dust from the Printer Sections The necessary tools are: • Vacuum cleaner • Brush • Isopropyl a

Maintenance Single Sheet Buffer and Sheet Bridge 1. Unlock the transport unit and pull it out on the telescopic rails. 2. Pull up the quick-actio

Operator’s Guide KODAK PROFESSIONAL RP 30 Laser Printer P/N 6B7444 December 2002

Chapter 2 Overview Contents Components... 2-

Operator’s Guide Print Engine 1. Open the locking mechanism (1) of the print engine. 2. Pull out the print engine (2) on the telescopic rails. 3.

Maintenance 6. Clean the light barriers with a brush or compressed air spray: • Beginning of Line – BOL (1): Start of exposure (accessible from ou

Operator’s Guide 7. Open the belt assembly. 8. Remove the paper dust with a vacuum cleaner. 9. Close the belt assembly again. IMPORTANT: Make su

Maintenance Lane Distributor WARNING: Be careful to avoid risk of injury caused by toothed belts that may run in the marked area. The purpose of th

Operator’s Guide Sheet Transfer 1. After pulling the red latch (1), remove the cover (2) of the sheet transfer. 2. Hold the sheet transfer by the h

Maintenance Cleaning the Paper Processor: CD Feed Unit, Tank Crossovers, and Squeegee Unit and V Wipers WARNING: Risk of injury is possible if the

Operator’s Guide CDBXSB1SB2SB3SB4 Removing the CD (Color Developer) Feed Unit 1. Open the paper processor cover and let it lock in the vertical posi

Maintenance Removing the Tank Crossovers Working from left to right, put each of the 5 tank crossovers in the lab basin. 1. Grasp the tank crossove

Operator’s Guide Removing the V Wiper and Squeegee Unit NOTE: The squeegee unit consists of a guide section and a holder for the V wiper. The holder

Maintenance CAUTION: NOTE: Do not damage the wiper edges of the V wiper. Check for damage. 2. Clean the squeegee unit and V wipers. a. Clean the r

Operator’s Guide Settings Menu (without Machine Settings) ... 2-30 Settings Menu (with Machine Setti

Operator’s Guide Checking the Solution Levels Purpose: To compensate for evaporation (also required with the automatic evaporation compensation). Che

Maintenance Cleaning the Filters in ASTOR and Water Inlets IMPORTANT: NOTE: IMPORTANT: Close the water tank cover (3) before beginning this procedur

Operator’s Guide Cleaning the Densitometer Calibration Plate The densitometer is mounted in the paper outlet. 1. Loosen the screw (2) and remove the

Maintenance Cleaning the Transport Belt of the Print Chute Use a cloth and warm water. 1. Clean the transport belt (1) with a damp cloth. 2. Wipe

Operator’s Guide Monthly Maintenance Checking the Solution Temperatures 1. Touch: • Settings • Machine settings • PP temperature 2. Set the refer

Maintenance Cleaning / Replacing the Air Filters CAUTION: NOTE: Let washed filters and filter mats dry well before reinstalling them. Do not wring,

Operator’s Guide 8-24 KODAK PROFESSIONAL RP 30 Laser Printer

Maintenance Right-hand Side Wall, Dryer and AC Power Supply of the Paper Processor NOTE: The air filters 1 and 2 are mounted in holders of perforat

Operator’s Guide Changing Chemical Filters WARNING: Risk of injuries exists if the cover of the wet section unlocked accidentally or carelessly. Se

Maintenance Cleaning the Processing Racks Purpose: To ensure optimum processing quality. WARNING: CAUTION: Wear protective gloves, a rubber apron, a

Overview Components The KODAK PROFESSIONAL RP 30 Laser Printer consists of three main components. 2 1 3 1 Main computer – controls the complete pr

Operator’s Guide 4. Lift the BX rack far enough so that the hinged holding plate can rest on the metal bracket to let the chemical solution drip fro

Maintenance 16. Before mounting the squeegee unit, put back the protective plate underneath. 17. Close the processor cover. Arrow, white Hin

Operator’s Guide Cleaning the Dryer Rack Necessary tools are: • Screwdriver or coin • Lint-free cloth and warm water 1. Remove the dryer cover. Us

Maintenance 6. Clean the hinged guide grids (see Figure) with a damp cloth to remove all chemical deposits (crystalline sheet bridge deposits). 7.

Operator’s Guide Cleaning the Paper Cleaning / Replacing the Air Filters NOTE: The filter with holder is mounted on the fan that is next to the den

Maintenance Cleaning the Guide with the Feed Chute 1. Unscrew (1) the guide plate (2) and lift it with the feed chute out of the supporting bracket

Operator’s Guide Cleaning the Rubber Transport Belts CAUTION: Only clean the rubber transport belts and the rollers in the paper outlet unit while t

Maintenance Paper transport on the output side for standard sizes: 1. Remove the deposit tray for the larger size prints. 2. Clean the visible par

Operator’s Guide Transport belt of the print chute Clean the transport belt (1) with a damp cloth. 8-36 KODAK PROFESSIONAL RP 30 Laser Printer

Maintenance Maintenance When Required Changing the Ink Ribbon on the Back Printer When the printing on the back of the prints gets too faded, the i

Operator’s Guide 3 4591112131012678 1 Print engine with laser fiber and laser module 2 Touch-screen monitor 3 Main computer 4 Wet section with rack

Operator’s Guide Emptying the Effluent Tanks WARNING: NOTE: Wear protective gloves, a rubber apron, and goggles when you empty the effluent tanks. As

Maintenance Consumables Chemicals Chemicals CAT No. KODAK EKTACOLOR Processing Cartridge 75 528 3345 KODAK EKTACOLOR RA Developer Starter 102 6681 A

Operator’s Guide KODAK PROFESSIONAL Digital III Paper Rolls in. x ft Rolls cm x m Surface Catalog No. E 871 5989 31/2 x 577 8.9 x 176 F 896 8570 E

EASTMAN KODAK COMPANY Rochester, New York 14653 U.S.A. Kodak and Kodak Professional are trademarks of Eastman Kodak Company. © Eastman Kodak Comp

EASTMAN KODAK COMPANYKodak Professional DivisionRochester, New York 14650www.kodak.com/go/professional© Eastman Kodak Company, 2002.TM: Kodak, Kodak P

Overview Product Description The RP 30 Laser Printer provides convenient and quick printing of digital images. The image files are transferred to th

Operator’s Guide Functional Procedure The RP 30 Laser Printer performs the following functions to process print orders. • Loads the image information

Overview Printer The printer transports the cut paper (1) to the print engine (2), exposes the paper to the laser beam, and advances it through the

Operator’s Guide Sorter After drying, the prints exit from the print chute (1) into the sorter (2), where they are sorted by orders and stacked in tra

Overview Densitometer The built-in densitometer (1) above the dryer automatically measures the test print. KODAK PROFESSIONAL RP 30 Laser Printer

Operator’s Guide Switching On the Equipment IMPORTANT: Before switching on the equipment, insert the paper magazines, which are loaded with the appro

© Eastman Kodak Company, 2002 All rights reserved. Contents of this publication may not be reproduced in any form without permission from Eastman

Overview Manual Switch-On 1. Switch on the main circuit breaker (1). 2. Press the ON button (2), if necessary. The ground fault interrupter (GFI) s

Operator’s Guide System Start After automatic or manual switch-on, the equipment heats the solutions and the dryer to nominal temperatures. During thi

Overview Start Screen After you log in, the menu bar with the five main menus appears. • Print mode offers all functions for image editing and pri

Operator’s Guide End of Work Changing Users To change users, you must first log out. 1. Select End of work in the menu bar. 2. Touch Change user. 3.

Overview Work can continue only if a user follows these steps to log in again. 1. Select the name of the next user. 2. Enter the password (four n

Operator’s Guide Manual Shutdown 1. Select End of work in the menu bar. 2. Touch Shutdown. 3. Change the start information in the display, if neces

Overview 4. Perform the daily maintenance procedures (see Daily Maintenance in Chapter 8). 5. If unprocessed orders exist, answer the query as to

Operator’s Guide Operating Controls Button and Lamp on the Main Computer There is one button and one lamp on the main computer: • ON button (1) If th

Overview Touch-screen Monitor The operation of the equipment is menu-driven by a touch-screen monitor. You activate the functions by touching the to

Operator’s Guide Screen Structure 9NOTE: This operator’s guide refers to the touch-sensitive fields of the touch-screen monitor as “buttons.” The sc

Table of Contents Regulatory and Safety Information... iii Regulatory Compliance ...

Overview Information Area The Information area includes the fixed buttons (i, ?, and Stop) and the status line. Because the fixed buttons are alwa

Operator’s Guide All error messages are saved. You can view a list of the messages by touching i, then Error list. Below is an example of an error lis

Overview Touch-sensitive Buttons NOTE: Only one screen is active. It is not possible to open several windows at the same time. The buttons in ar

Operator’s Guide 1. Select the desired configuration from the list. 2. Touch OK. Pop-up Windows Pop-up windows open on the active screen if you m

Overview • An Info pop-up appears to provide additional status information. • A Query pop-up appears to let you avoid potential problems. KODAK

Operator’s Guide Input Screen When you must enter text, numbers, or special characters, the Input screen opens. • The image of a keyboard includes

Overview Numeric Keypad Use the numeric keypad in the display to enter the desired number and touch OK to confirm. Menu Bar The main menus are alwa

Operator’s Guide Menu Overview Main Menus You can open the following main menus from the menu bar: • Print mode • Settings • Test • End of work N

Overview Print Mode Menu KODAK PROFESSIONAL RP 30 Laser Printer 2-29

Operator’s Guide Settings Menu (without Machine Settings) 2-30 KODAK PROFESSIONAL RP 30 Laser Printer

Operator’s Guide Chapter 6 Production...6-1 Preparing the Equipment for

Overview Settings Menu (with Machine Settings) ar KODAK PROFESSIONAL RP 30 Laser Printer 2-31

Operator’s Guide Test Menu 2-32 KODAK PROFESSIONAL RP 30 Laser Printer

Overview End of Work Menu Status Information / Help Menus KODAK PROFESSIONAL RP 30 Laser Printer 2-33

Operator’s Guide Additional Screens These screens are accessible at any time. They are displayed when: • Configurations can be modified, on demand wi

Overview Info Printer The Info Printer screen is a graphic representation of the paper transport and shows the number of prints at the individual s

Operator’s Guide Info Paper Processor The Info Paper Processor screen is a graphic representation of the solution tanks and the dryer, and shows the

Overview Info Order The Info Order screen displays the number of orders not yet printed, including network orders and orders stored for file prints

Operator’s Guide Version Info The Version Info screen shows: • Current versions of the installed software and firmware • Serial number of the hardw

Overview Error List All error messages shown in the status line are saved. Touch i, then Error list to view the error messages. The list shows the

Operator’s Guide Help You can access Help from every screen that has a ? in the information area (see Screen Structure on Page 2-20). NOTE: NOTE: For

Regulatory and Safety Information Contents Regulatory Compliance ...

Chapter 3 Chemicals Contents Contents ...

Operator’s Guide 3-2 KODAK PROFESSIONAL RP 30 Laser Printer

Chemicals Preparation of Chemicals CAUTION: A risk of injury is possible if the wet section cover is unlocked (PUSH is pressed) unintentionally. Th

Operator’s Guide A water temperature of approximately 30°C (86°F) is recommended for the preparation of the individual tank fillings. The chemicals c

Chemicals Mixing the Tank Solutions The instructions assume that you are mixing the fresh-tank solutions directly in the processor tank. CAUTION:

Operator’s Guide Bleach-Fix You can mix the working bleach-fix tank directly from the two-part concentrates. Use two EKTACOLOR Processing Cartridge 75

Chemicals Installing the Racks and Bringing the Tank Solutions to Temperature When you fill the tanks with the new mixes, they will appear only part

Operator’s Guide 4. Put the EKTACOLOR Processing Cartridge in the docking station with the sticker facing up. 5. The preparation of the replenishers

Chapter 4 Settings Contents From the Order Receipt to the Finished Print ...4-3 Administrator ...

Operator’s Guide Print Configurations ... 4-40 Creating, E

Operator’s Guide Regulatory Compliance EMC Compliance NOTE: WARNING: This equipment has been tested and found to comply with the limits for a Class A

Settings From the Order Receipt to the Finished Print Administrator Administrator actions Definition of settings, configurations, users Initiated

Operator’s Guide Operator Operator actions Logon, preparing the equipment, test, and order editing

Settings Preparation of the Print Configuration SettingsSettingsPapersurfacesPapersettingsSettings of cutlengthsTestPerformMBL/PBL withlaser point

Operator’s Guide SettingsSettingsSurfacesSet/changeswitche.g."fine grained"e.g."fine grained new"edit newChangePFDFsurfaceOK

Settings Paper settingsSelect paperwidth in mme.g."152"e.g."200"edit newSet switch forcassettecodingSaveReturnSet switch f

Operator’s Guide 4-8 KODAK PROFESSIONAL RP 30 Laser Printer SettingsPrint settingsOrderSelectconfiguratione.g."File print"e.g."F

Settings KODAK PROFESSIONAL RP 30 Laser Printer 4-9 e.g."off"Select indexprint/offOKSelect backprint/offOKAdjustcorrection/offAdjus

Operator’s Guide 4-10 KODAK PROFESSIONAL RP 30 Laser Printer Fill print size topaper Select FFadjust to ...OKSelect P Paperconfiguration /off

Settings Settings Settings can only be modified if there is no paper in the transport of the printer and paper processor. The Settings menu item i

Operator’s Guide Entering Names If entry of names is required, the Input screen opens automatically. Names of configurations have a maximum length

Regulatory and Safety Information Mechanical Hazard Symbol CAUTION: WARNING: CAUTION: Moving parts. Avoid contact. Keep your hands, hair, loose clo

Settings Entering Numbers If entry of numbers is required (the numeric user password, for example) the numeric keypad opens automatically. Enter

Operator’s Guide Machine Settings Types of Settings To open, touch: • Settings • Machine settings The machine settings are divided into two secti

Settings Machine • User interface for the national settings • User manager to create users with name, password, and rights of access • Setting

Operator’s Guide Defining Surfaces 1. Touch: • Settings • Machine settings • Surface • New 2. Select PFDF surface. This is a list of the stan

Settings Defining Paper Settings 1. Touch: • Settings • Machine settings • Paper settings 2. Touch New to create a new paper width 3. Selec

Operator’s Guide 4. Activate the appropriate Switches. The switches 1 to 4 define the paper width. (See Coding the Paper Magazine on the next pag

Settings Coding the Paper Magazine The paper magazine is coded for the paper width (1-4) and the surface (5-6) in use. The meaning of the coding

Operator’s Guide Defining Cut Lengths 1. Touch: • Settings • Machine settings • Cut length 2. Select New cut length / Delete cut length to upda

Settings User Interface 1. Touch: • Settings • Machine settings • User interface 2. Select the data for the user-specific settings: • Langu

Operator’s Guide User Administrator: Defining Users and User Rights Enter the settings under User interface first, because they are needed for the u

Operator’s Guide Certification Labels A B Non-interlocked Panel Label Aperture Label CDEvi KODAK PROFESSIONAL RP 30 Laser Printer

Settings − Edit Select the user in the list and touch Edit to change the corresponding settings. The next screen opens. − Password, Repeat The p

Operator’s Guide − User rights The administrator can combine the user rights listed in the following table individually for each user in order to cr

Settings Startup: Defining the Start Time / Standard User (Timer) 1. Touch: • Settings • Machine settings • Startup 2. Define: • Automatic S

Operator’s Guide Calendar: Defining Off Days 1. Touch: • Settings • Machine settings • Startup • Edit calendar 2. Select year / month with th

Settings Installing the Software 1. Touch: • Settings • Machine settings • Install software 2. Touch Load CD. 3. Touch Install. Check if the

Operator’s Guide Printer Settings 1. Touch: • Settings • Machine settings • Printer 2. Enter the required information: • Overlapping Indicate

Settings Paper Processor Settings Setting the Replenishment Rates NOTE: CAUTION: It is not possible to modify the individual replenishment rates.

Operator’s Guide • At the first system startup or after the RP 30 Laser Printer has not been used for some days, you must enter an initial value. T

Settings Changes in the parameters shifts the printed results into one direction. For this reason, only experienced operators should modify parame

Operator’s Guide Impact Changes in the correction effect (only influences the color and density regulators): • Presetting: 100% • Range: 10 to 20