Kodak CIS-201 Manual de usuario descargar pdf

©Eastman Kodak Company, 2000

March 2000 • CIS-201

CURRENT INFORMATION SUMMARY

Printer Conversion to

KODAK EKTACOLOR Edge 8 and

EKTACOLOR ROYAL VIII Papers

KODAK EKTACOLOR Edge 8 and ROYAL VIII Papers

incorporate new image-forming components to deliver

improved colors. These new papers are designed so that a

visually neutral patch will result in approximately balanced

red, green, and blue densities when measured with

densitometers that conform to ANSI Status A responses.

Some densitometers that do not conform to ANSI Status A

responses may produce non-matched red, green, and blue

densities for a neutral patch on these new papers. Labs that

use these non-Status A densitometers must compensate for

the differences in densitometer performance when they set

up printers for the new papers.

WHY DOES THIS HAPPEN?

Densitometers fall into two classes: (1) for analytical use and

(2) for comparative use.

Analytical densitometers conform to an ANSI standard

called “Status A.” Status A densitometers correlate colors

similarly to the human eye through a wide color and density

range. These densitometers will give similar readings for

KODAK EKTACOLOR Edge 7/ROYAL VII and

EKTACOLOR Edge 8/ROYAL VIII Papers if the prints

appear visually matched.

Comparative densitometers are designed to match prints

to a specific density. They are not intended for use over a

wide range of densities and colors, and they do not see colors

as the human eye does. These densitometers are often used

in printing systems as a part of a minilab or a high-speed

printer. They produce consistent measurements in the ranges

used for printer setup. However, with KODAK

EKTACOLOR Edge 8 or ROYAL VIII Paper, they do not

measure the neutral aim patches as neutral. For example, an

aim print on EKTACOLOR Edge 8/ROYAL VIII Paper

measures 0.80 red, 0.80 green, and 0.80 blue with a Status A

densitometer. The same print may measure 0.70 red,

0.80þgreen, and 0.80 blue with a comparative densitometer.

WHAT DOES THIS MEAN FOR LABS?

New EKTACOLOR Edge 8 and ROYAL VIII Papers

provide many performance advantages. But when they are

used with densitometers that do not conform to Status A

specifications, results may vary. Labs that use these

non-Status A densitometers must compensate for differences

in densitometer performance when setting up their printers

for the new papers.

When you are ready to convert to KODAK

EKTACOLOR Edge 8 or ROYAL VIII Paper, follow the

procedure below to determine how your densitometer

performs. Once you’ve determined the densitometer

performance, choose the appropriate compensation

procedure (if one is necessary).

To Determine If Compensation Is Required

1. Print your “Normal” Printer Control Negative on

EKTACOLOR Edge 7 or ROYAL VII Paper at the aim

density.

2. With EKTACOLOR Edge 8 or ROYAL VIII Paper,

balance to match the density readings from Step 1.

3. Compare the two prints. If the prints match visually,

follow normal printer paper conversion procedures (see

your printer manual). If the print from Step 2 appears

cyan, the densitometer is reading EKTACOLOR Edge 8

or ROYAL VIII Paper differently. You will need to

follow one of the compensation procedures below.

Note: Compensation procedures have not been prepared

for equipment that produces matched prints in Step 3 of

the procedure above. If your printer is not included in

the list below, follow your equipment manufacturer’s

paper setup instructions.

COMPENSATION PROCEDURES

If you have one of the printers in the following list, choose

the appropriate procedure:

Compensation Procedure for NORITSU 1401/1501

Printers

Compensation Procedure for NORITSU 1801 Micro

Printer

Compensation Procedure for NORITSU 1701/1702

Printers (without NOUS Scanner)

Compensation Procedure for NORITSU 901, 1001,

1201, and 1202 Printers

Compensation Procedure for COPAL Minilab, Models

1B, 1C, 5C, 5C II, 5L, 5S

Compensation Procedure for AGFA MSP Printers

Compensation Procedure for AGFA MSC Printers

Compensation Procedure for GRETAG Masterlab

Compensation Procedure for GRETAG Masterflex

1 2 3 4 5 6 ... 11 12

Indice de contenidos

Pagina 1 - EKTACOLOR ROYAL VIII Papers

©Eastman Kodak Company, 2000March 2000 • CIS-201CURRENT INFORMATION SUMMARY Printer Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII Pape

Pagina 2 - NORITSU 1401/1501 Printers

10 Printer Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII Papers • CIS-201Compensation Procedure for AGFA MSC PrintersFollow this proce

Pagina 3

Printer Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII Papers • CIS-201 11Compensation Procedure for GRETAG MasterlabFollow this proced

Pagina 4 - Micro Printer

Printer Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII PapersPrinter Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII Pape

Pagina 5

2 Printer Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII Papers • CIS-201For other printers, follow these steps:1. Print your “Normal”

Pagina 6 - 1001, 1201, and 1202 Printers

Printer Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII Papers • CIS-201 3Morning Setup channel will use the new paper, you would input

Pagina 7 - Method 2:

4 Printer Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII Papers • CIS-201reference print, and if you use the same paper for channels 10

Pagina 8

Printer Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII Papers • CIS-201 5Divide the Cyan, Magenta, and Yellow difference values by 10 t

Pagina 9

6 Printer Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII Papers • CIS-2016. Press D-IN and input the range of channels that will be usi

Pagina 10 - Printers

Printer Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII Papers • CIS-201 7If the Under and Over test prints do not match the reference p

Pagina 11 - Masterflex

8 Printer Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII Papers • CIS-201Subtract the test densities from the reference (aim) densities

Pagina 12

Printer Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII Papers • CIS-201 9b. Type MOPC (Modify Paper Channel). Enter the Paper Channel

Comentarios a estos manuales

Sin comentarios

Kodak CIS-201 Manual de usuario

Busca en linea o descarga Manual de usuario para Impresión y escaneo Kodak CIS-201. Kodak CIS-201 User's Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Kodak CIS-201